It's very easy to buy in the market, and it's usually a little more expensive in the store, so you can pick up your plates online, and it's not too expensive. When we buy the flash drive, we can use it to make the flash drive. The process is very simple, and we need computers, mouse, and networks. It's a nice reminder that all brands have flash drives that can be used properly, as long as they operate correctly。
Production methods
There are basically two ways to create a flash drive:
1: be made into a pe startup disk that is simple and practical and does not affect the use of disks。
2: the mass production of disks, made into u-cdroms, is as practical as optical after plugs, although the production is complicated. Not all drives are supported, so the simplest is definitely the first one, but there are many ways to get you a simplest way to prepare the software, floppy express, to download it online today. The next iso format, like master u, of course, is to prepare for the pe. It's better to have a 4g or more。
Method of operation
Step 1: open the software floppy express to start the cd-rom -- write hard disk images to select the disk you want to do without mistake! Format. After completion - select the portable start - write a new drive sector - windows 9x and complete step 1。
Step 2: open the software floppy express selection file, open it, find your already downloaded pe and open it。
And then you start the cd -- write the hard disk image -- select the drive you're going to make -- select the usb-hdd+ -- and click on it, and then you finish the pe drive。
Start settings
Insert a ucd into the usb interface (preferably in the usb interface behind the host and temporarily remove his usb device), restart the computer, enter the bios settings by the "del" key as the system enters the self-check interface, and find the location where the computer is set to start, such as "advanced bioos features" or "boot device capacity" , corresponding to the self-produced start-up ucd format, select "first boot device" as "usb" or "usb-hd" or "usb-zip" and then press f10 to save, then press y to confirm, exit the bios settings and restart the computer。
Because the main panel is different, the method of selecting usb starts is different. Some of the new boards, “usb-hd” are set in “advanced bios features”/ “boot seq & floppy setup”, with “first boot device” as “hard disk” and then “hard disk bot policy” to select your u-disk (the u-disk is to be plugged in before it starts)。
Once you've finished making the flash drive, we can start it. At this point, of course, many will question how to activate the start-up disk that has been made. First, we should insert the previously used disk into the computer again, then download a winpeu. Lar file and depress it, and then open the directory program, at which point we just have to double-click the image file "winpe. Iso" and click on the "start" option to start the finished startup。
