The tropics, which can be trimmed, can be tailored to the needs of the site, suitable for pipes, various types of tank protection, and flexible and fault-tolerant construction. The market can cut more cables and there are significant variations in suitability. The precise distinction between product characteristics and applicable scenarios is an important prerequisite for the selection of works and the regulation of construction。
Free-temperature tropicsIs the most widely applicable shearable model. This type of cable can be trimmed for any length and does not need to match the fixed number of metres, and is suitable for drainage, fire protection and process pipes of varying lengths. It has automatic temperature control, low temperature high power supplementation, high temperature automatic cooling, and no heat builder. It is divided into three classes: low temperature, medium temperature, high temperature, common anti-frozen selection, low temperature, and mild process-to-temperature selection. The back-end port was flattened and closed with terminal seals, suitable for the vast majority of civil and small- and medium-sized industrial projects。
Free-temperature tropics
The tropics of constant power are commonly industrially cutable. Compared to a limit-to-temperature cable, it produces constant heat power and stabilizes temperature and is suitable for process lines, storage tanks that require precision constant temperature. Wires support segmenting and precision in terms of the length of the on-site pipeline, with no waste. Unlike a serial cable, the failure of a single segment of the structure does not affect the whole line and is more secure. Most are used in chemical, oil and gas, and plant processes to keep the temperature of the medium stable over the long term and to avoid media condensation problems caused by temperature fluctuations。
The blast-resistant enhanced tropics can be tailored and designed specifically for high-risk conditions. (b) upgrade the protective and seal structures based on normal self-restricted temperature and conjunctive power, with flame retardation, blast resistance and anti-age resistance. Wire lines continue to support on-site tailoring and adaptation to flammable and explosive workshops, gas stations and chemical pipelines. The cut-off port is sealed with blast-proof fittings to prevent flashes and fully meets the standards for blast-proof inspection and inspection. Outdoor tans, humid troughs, corrosive conditions give preference to this type, with a longer useful life。
Free-temperature tropics
Uvs can cut the tropics and host outdoors. The outdoors are permanently eroded by ultraviolet, wind and heat differentials, and ordinary cables are prone to ageing and cracking. Readiness-type cables, with heavy special protections, are resistant to uv and highly resistant, and support the site's arbitrary tailoring, suitable for house-side pipes, open-air tanks and outdoor fire pipes. The high alignment of the wiring and the ease with which construction can be performed without prior customization significantly reduced the difficulty of construction work on outdoor works。
The work on shearable cables is subject to a standard process. On-site tailoring must be vertically smooth, with no slopes, skins or wiring. Time-line cables are applied flat-lined to the wall of the tube, and pressure-sensitive tape bands are used to flatten and prevent the accumulation of heat in the air. The cut-off port shall be sealed with a terminal header to prevent leaks and short circuits caused by leaking water vapours. The various types of cables may not be combined with fittings, and blast-proof conditions are strictly accompanied by blast-proof wire boxes and seals to ensure the safe operation of the system。
Pressure tape
The various types of cutable tropics have suitable scenarios, and civil anti-frozen selections are from temperature limits, industrial thermos and condensation, and high-risk outdoor implosion resistance models. Construction is done on a needs-selected, standard tailor-made basis, with a standard fixed seal of pressure-sensitive tape, capable of adapting to the freezing requirements of the vast majority of piped tanks and ensuring the stable long-lived operation of the co-heat system。
